SO6 Portable Site Office 6m

It depends on where it goes and for how long. A temporary site office on an active construction site is usually handled through your development consent or a temporary structure permit, while a cabin that stays on a block, for example a home office out the back, normally needs approval from your local council. Rules differ between states and councils, so check with your council or a private certifier. We supply drawings and compliance documentation to support your application and cannot guarantee approval.

The insulated steel framed cabin with EPS insulated wall panels, woodgrain composite cladding, an insulated roof, full height double glazed corner glass, a glass sliding door, a hinged glass door, a porthole window, timber look vinyl flooring over the composite subfloor, LED downlights, power points, a switchboard and a hardwired smoke alarm. Furniture in the renders is for illustration only, though a furniture pack can be added at quote.

Production typically runs around 20-30 working days once your order and colour selections are signed off, then allow 20-30 days for sea freight, customs clearance and inland transport to site. For most capital city destinations, allow around 40-60 total calendar days door to door. Your quote confirms the exact build time, freight and delivery window for your address, and pricing is on request.

At about 2,120 kg and 5.85 m long, the cabin is craned or forklifted off a truck in a single lift, so you need a firm, level approach, room beside the drop point for the crane, and clear overhead space with no powerlines or branches in the lift path. It fits through most yard gates and down many side accesses. Send photos and gate widths at quote and we will plan the delivery.

No slab is required for temporary use. It sets on level ground, timber sleepers or a compacted pad and is levelled on its corner castings. For a permanent install, a concrete slab or screw piles give a stable, level base, help with drainage and are often expected by a certifier. Your engineer confirms the footing detail for your soil class and wind region.

The cabin ships with LED downlights, power points, a switchboard and a hardwired smoke alarm already fitted, and the mains cable is terminated ready for a licensed electrician to connect and test on site. The fit out can be wired to Australian standards on request. Split system air conditioning from 2.5 to 7.1 kW is an option, and most Australian buyers add it before the unit ships.

As supplied it is a commercial cabin rather than a dwelling, and there is no kitchen or bathroom. If you want habitable accommodation on your block, it is built to order to NCC Class 1a requirements, with compliance documentation supplied, and it will need council approval plus a licensed plumber and electrician. Tell us the intended use at quote so services, wet areas and insulation are specified from the start.

Every written quote confirms warranty duration, covered components, exclusions, remedies and the claim pathway through Future Modular Homes before an order is accepted for each project. You can also have the cabin inspected and photographed by an independent third party before it ships. A commercial invoice, packing list and the quality documentation on file travel with every order.