Speak to an AustralianBook a call ›
Book a call
  • Australian owned and operated
  • Project-specific compliance evidence coordinated
  • Typical factory production: 20–30 days
  • Typical delivery: 20–30 days
  • Typical 40–60 days total, factory to site
  • China factory pricing
  • Finance available through Ausloans
  • As seen in Domain
  • Written project scope before commitment
  • Models shown as starting points for project scoping
  • Australian owned and operated
  • Project-specific compliance evidence coordinated
  • Typical factory production: 20–30 days
  • Typical delivery: 20–30 days
  • Typical 40–60 days total, factory to site
  • China factory pricing
  • Finance available through Ausloans
  • As seen in Domain
  • Written project scope before commitment
  • Models shown as starting points for project scoping
Built to orderCharcoal MD95 capsule home on a gravel pad, glazed end wall and sliding doors along one side with steps up to the entry door

8 photos including floor plans.

Model MD95

MD95 Capsule Home 9.5m

  • Factory quote available
  • Warranty confirmed in your quote
  • Delivered Australia wide

31.4 m2 with a skylight, dual air conditioning and room to sleep four.

Future Modular Homes · Quote only

Why buy from Future Modular Homes? See who we are →

Pricing

Request a quote

Get a price →Ask a question

See all modular homes →

A 31.4 m2 single module home with a separate living and sleeping zone, a laminated skylight over the centre of the plan and a full bathroom. It is the size most Australian buyers land on for a granny flat, a rural guest house or a short stay rental.

Delivery
Australia wide by truck and crane. We deliver and build worldwide, so tell us where the block is.
Lead time
Confirmed in your quote. Build slots move, so we quote the real date rather than a brochure figure.
Project support
From initial design through to delivery, our team helps coordinate the process and keeps you updated along the way.
Minimum order
1 unit

What is included with your MD95 Capsule Home 9.5m

Every unit is built to order and arrives complete to this specification.

  • Overall floor area. 31.4 m2
  • Structural frame. Hot dip galvanised steel structural frame system
  • Glazing. Insulated soundproof energy saving tempered glass, full height
  • Entry door. Baked enamel stainless steel swing door
  • Interior finish. Pre finished ceiling, eco grade wall lining, SPC bathroom wall, SPC timber grain flooring (stone plastic composite, a hard wearing waterproof board)
  • Bathroom. Vanity, 80 L storage water heater, rain shower, toilet suite, tempered glass doors
  • Electrical. 240 V configured for Australia (110 V available for other markets)

About this model

What it is

At 9.5 m by 3.3 m the MD95 is the point where a capsule stops reading as a studio and starts living like a small home. There is room for a proper living area and a sleeping zone that takes a twin bed kit to sleep four, plus the ceiling height for an insulated laminated tempered glass skylight with its own blackout blind over the middle of the floor, so daylight reaches the centre of the plan rather than only the glazed wall.

The kitchen sits outside the base specification so you can have one built to your own layout at the factory.

How it is built

Two central air conditioners, 1.5 HP and 2.0 HP, with fresh air ventilation, hold an even temperature through an Australian summer. The bathroom carries a vanity, an 80 L storage water heater, a rain shower set, a toilet suite and an anti fog mirror over an SPC wall lining and SPC timber grain floor.

Standard fit out includes whole home ambient lighting, a hotel grade lock, voice control, a motorised curtain, a concealed insect mesh system and a pair of wall mounted exercise rings. The hot dip galvanised steel frame and PVDF coated aluminium shell are specified for coastal salt air without repainting, and net weight is about 6.5 tonnes.

Delivery and freight

At 3.3 m wide the unit is wider than a shipping container, so it rides a 40 ft flat rack (an open shipping platform used for cargo too wide to fit inside a container), lands complete, and one mobile crane sets it on a slab or screw piles (steel posts wound into the ground instead of pouring a slab) inside a day. Factory quote available.

Spec sheet

Specifications

External dimensions 9,500 x 3,300 x 3,300 mm (L x W x H)
Overall floor area 31.4 m2
Sleeps 2 as a studio, up to 4 with the twin bed kit
Weight About 6.5 tonnes
Power 8 kW base, 14 kW with both air conditioners running
Structural frame Hot dip galvanised steel structural frame system
External cladding PVDF coated aluminium alloy shell modules
Glazing Insulated soundproof energy saving tempered glass, full height
Skylight Insulated laminated tempered glass skylight with a dedicated blackout blind
Entry door Baked enamel stainless steel swing door
Interior finish Pre finished ceiling, eco grade wall lining, SPC bathroom wall, SPC timber grain flooring
Heating and cooling Central air conditioning (1.5 HP plus 2.0 HP) with fresh air ventilation
Bathroom Vanity, 80 L storage water heater, rain shower, toilet suite, tempered glass doors
Smart home Voice control, hotel style electronic lock, multi mode control panel, motorised curtain
Electrical 240 V configured for Australia (110 V available for other markets)
Shipping mode 40 ft flat rack, the 3.3 m width exceeds the 2.34 m clear width of a container
Site assembly Under one day on a prepared slab or screw pile footing
Price Factory quote available

Final specifications are confirmed in writing with your quote. Built to order to NCC Class 1a requirements, with compliance documentation supplied.

Quote enquiry process

How an enquiry works

A quote enquiry is not an order. Nothing is committed until you have a written quote naming the scope, the price and the delivery terms.

  1. 1

    Tell us the block

    Send the model, your suburb or postcode and what the block is like. Access, slope and crane room change the price more than anything else.

  2. 2

    Get a Free Quote

    A written quote covering the unit, freight to your address, and what is and is not included.

  3. 3

    We start your build

    We lock in your design with you and then we coordinate with our builders to begin production.

  4. 4

    Delivery and set down

    We coordinate the delivery process from factory to site, ensuring your home arrives safely and is positioned at your property with everything planned ahead of time.

Get a price →

Frequently asked questions

Can it be used as a granny flat?

That is the most common Australian use for this size. The MD95 is built to order to NCC Class 1a requirements, with compliance documentation supplied, covering the structure, AS/NZS 3000 (an Australian and New Zealand standard) electrical and AS/NZS 3500 plumbing. Your council or private certifier assesses the application. Secondary dwelling rules, floor area caps and setbacks differ by council, so check your local controls before you order.

How long does it take to arrive?

Factory production typically runs for around 20-30 working days once the specification and deposit are settled, and sea freight to an Australian port typically takes an estimated 20-30 ocean transit days depending on the lane and sailing schedule. This window includes customs clearance, quarantine inspection and the road leg. We confirm firm dates in writing with your order.

Does it sleep two or four?

Out of the box it is a studio for two. The twin bed kit converts the sleeping end so it comfortably takes four adults, which is why short stay operators and workforce accommodation buyers choose this size. An internal room door can be added at the factory if you want the sleeping zone properly partitioned from the living area.

What access do I need for delivery?

The home arrives in one piece on a semi trailer and is craned onto the footings. You need a firm truck path at least 4 m wide, a hardstand (firm, level ground that will take the weight of a truck or crane) for the crane within reach of the drop zone, and clearance from power lines and overhanging trees. Send photos and a site plan early and we will tell you what is needed.

What about coastal and cyclone regions?

The standard build is specified to N3 wind classification. For cyclone regions a reinforcing wind brace package is added at the factory rather than the shell being redesigned. Coastal blocks can also take extra anti corrosion treatment. Give us the exact address at quote stage so the wind classification and any bushfire attack level are set before production.

What is not included in the price?

Footings and site works, the kitchen, sea and road freight, customs duty and GST, crane hire, and connection to power, water and sewer are all separate. The unit lands pre wired and pre plumbed, so your licensed electrician and plumber connect it to services. We quote the landed cost through our freight partners so there are no surprises.

How is it different from the 5.6 m capsule?

Roughly double the floor area at 31.4 m2 against 18.5 m2, two air conditioners instead of one, a laminated skylight with its own blackout blind, and wall mounted exercise rings as standard. An internal room door is available so the sleeping zone can be closed off. Shipping mode, compliance documentation and warranty terms are the same.

What warranty applies?

Warranty duration, covered components, exclusions and remedies are confirmed in your quote and order documents, with claims handled through Future Modular Homes. Correct installation on the specified footing and connection by licensed trades are conditions of the structural cover, so keep the commissioning paperwork from your electrician and plumber with the compliance pack.

Owner feedback

Future Modular Homes has delivered homes to buyers across Australia and has been featured in Domain. We publish feedback from real buyers only, so this model shows none until a verified owner sends one in.

Ask to speak to a past buyer

Popular models

See the full range

Get a price on the MD95 Capsule Home 9.5m

Tell us your postcode and what the block is like. We come back with a written quote covering the unit and the freight to your address.

Get a quoteBook a call insteadBrowse the range

MD95 Capsule Home 9.5mGet a Quote

Future Modular Homes

Get a Quote

Australian owned and operated, with China factory pricing. Project-specific compliance evidence is coordinated for your certifier.

Typical factory production is 20–30 days and typical delivery is 20–30 days, around 40–60 days in total from order to site. Australia-wide logistics are coordinated by project; international enquiries are assessed individually.

Office hours Monday to Friday, 9am to 5pm AEST.